Braided hose replacements

[THE 8 BALL EXPRESS]

I need to do braided hoses on my mustang...
Has anyone ever done this?
I have no clue where to begin....
How do i connect the braided hose length to the ends..I need special ends am I correct?...Uuugh.
I also want to replace the black hoses w/colored hose (aside from the ones on top that are going to be braided.and the Wire Loom as well )
Wire loom----what sizes/lengths to I need?
Alot going on and this is on top of other things other people are doing..
So if anyone wants to add some advice, please do

[GT800]

Mr gasket sells a pretty legit kit to do this. ive done it before its a pain in the ass. Just very tedious to make it look good.

[THE 8 BALL EXPRESS]

Might just go with colored hoses..

[Liftedbronco]

to do real braided hoses is increadably expensive and requires a cheap special tool (double flare tool) and a little knowhow. To me its so not worth it unless you need it. They do make the hose covering kits but i would have low expectations of those.

[godspunk32]

What are you guys talking about? Goodridge sells a stainless brake line kit for $213 that's available from Tirerack (link). There's no need to make your own stainless lines, and to install them is cake.

Undo the banjo bolt from the caliper, undo the nut that connects the old brake line to the hard line, connect the new lines with new copper washers, bleed/flush the brakes with good synthetic fluid, and you're off! If you want them colored, pick up some colored wiring loom, and just wrap the lines in that!

JR

[GT800]

we arent talking about brakes godspunk. we are talking about replacing underhood hosing replaced with braided

[godspunk32]

Oh. Derp. My bad.

Back to your regularly scheduled thread!

JR

[Snipes]

Braided hose is expensive and painful on the hands...... You will bleed!!!

[GT800]

True that