Changing stock 2007 Mustang V6 spoiler to stock Mustang GT spoiler.. help!

[Maverick07]

I removed the nuts from the bolts coming through the decklid, and I assume I need a heat gun to loosen up the automotive tape above the brake light, or is there something else I'm missing?

Also am I gonna need to buy new bolts or can I take the ones out of the v6 spoiler that I'm removing? If I do need new ones, what size/type am I gonna need to pick up?

[Hotshot]

high strength fishing line i heard gets through the stock 3M tape very well. The holes should align properly.

http://www.allfordmustangs.com/forum...-stock-v6.html

[Maverick07]

Originally Posted by Hotshot

high strength fishing line i heard gets through the stock 3M tape very well. The holes should align properly.

http://www.allfordmustangs.com/forum...-stock-v6.html

haa good call.. I didn't even think of that. living at a beach house.. welp i've got plenty of that lying around...

any easy solution to take the tape off (if it sticks to the decklid)?

[GT800]

heat gun pr a blow dryer will do the trick for taking of the tape and removing the old spoiler

both spoilers should have studs with nuts if they are both ford they will both be the same ive had both on my car.

[Bopper]

If I'm not too late. As tempting as it is, don't rock the spoiler forward and aft to loosen it up. You will dent the trunk. I haven't done this personally, just heard the stories and thought I would pass it along.

[GT800]

yeah bopper your exactly right i watched a guy do it at a car show when he was to anxious to get his new wing on and he warped the whole top of the lid

[Maverick07]

thanks for the tip!.. I didn't get to it yet considering the sub zero temperatures yesterday and today... but its supposed to touch the 40's the end of this week so i might very well get this done!... its times like these I really wish I had a garage

[GT800]

ya no problem buddy. i put all the heat on the underside because i was slightly scared of burning the clear coat and it reeled right off